Profi Line electrical distribution boxes are produced in A/s EF “JAUDA” using Austria Company Moeller F&G license. These distributors are used for power, lighting, meter and automated control devices. In comparison with ordinary distributor frames produced by company JAUDA, Profi Line distribution boxes are the following advantages: - Distributor frames are produced in standard size that is why you will know the box size in advance according to distributor type.
- The inbuilt distributor box protection covers have useful and safe 4 side outlets for cable fixture to the wall.
- The inbuilt distributor boxes have two depths 240 mm and 180 mm and additional joints for the frame extension up to 150 mm
- Depending on necessity, inbuilt distributor boxes (safety cover) can have doors by degree of protection: IP30, IP43, IP54
- Distribution boxes can be with or without back wall. If there is no back wall it is possible to get to the device and clips from the back
- The outer plaster distribution boxes are produced in two variants, with degree of protection IP30 and IP54. The standard depth is 250 mm.
- At client request the distributors can have lock of EMKA company
- It is easy to install additional devices and make additional connections, because device can be installed on DIN busbar, which are fixed at side frame with special holders.
Wide overall dimension range: from 454x564x250 mm till 2054x1234x400 mm (height x widths x depths). |  |
